Captain Duncan Barnes - Newfoundland to Toronto

I've been fascinated with my Great Great Grandfather, Duncan Barnes ever since I started researching my roots back in 2005. I hope to get to Newfoundland one day to find out more and visit the places he lived but for now, I'll have to settle for online research. Today I would like to share some information about my seafaring ancestor.

Duncan Barnes was born on Friday, March 20, 1863, in Harbour Grace, Newfoundland. He was the son of Ebenezer Webber Barnes and Jane Pike (possibly Parsons, I have conflicting information) and was baptized at the Methodist Church in Harbour Grace, Newfoundland on May 16, 1863.

Duncan was a Master Mariner that shipped cargo around Newfoundland and also took sealers up to the ice fields for their hunts. For a time he was the Captain of the S.S. Aggie, a steamer that took lumber and other supplies, as well as passengers around Newfoundland.

Duncan had three wives in total but also had an illegitimate child. As far as I can work out the mother

Petitioners for Borough Charter - Sewickley, 1853


My 3x Great Grandfather Joseph W. Warren was a resident of Sewickley, Pennsylvania.  During my research, I found that he was referenced along with my 5x Great Grandfather, Nathan McPherson in the book "The Village of Sewickley" by Franklin Taylor Nevin, published in 1929.  Much to my delight, I was able to find an original copy from an online bookseller a few years ago.  In this book, there were a few lists of names that I wanted to share as well as the map below.

By the mid-1800's Sewickley, Pennsylvania had grown to be a large village of about 500 inhabitants and wanted to become a Borough.  On April 8, 1853, they presented to the grand jury a petition of a majority of freeholders and a majority of the legal voters that were within "the present limits of the Borough of Sewickley who are desirous of being regularly incorporated as a Borough and forming a

List of Voters in Ohio Township in 1836





My 3x Great Grandfather Joseph W. Warren was a resident of Sewickley, Pennsylvania.  During my research, I found that he was referenced along with my 5x Great Grandfather, Nathan McPherson in the book "The Village of Sewickley" by Franklin Taylor Nevin, published in 1929.  Much to my delight, I was able to find an original copy from an online bookseller a few years ago.

There is a lot of great information in this book and it also includes some valuable information that may interest other genealogists.  I have transcribed the following as it appears in the book.  Hopefully, it helps someone with their research.

Freemason Membership Registers

Freemason Ancestor Duncan Barnes of Newfoundland


While researching my great-great-grandfather, Duncan Barnes - A Newfoundlander from Harbour Grace -  I came across this great register in the Ancestry.com Card Catalog called "England, United Grand Lodge of England Freemason Membership Registers, 1751-1921".

My Dad told me that his grandfather and his uncle were Freemasons.  I thought maybe his great-grandfather was too.  Sure enough, he shows up in this register twice.  The first mention is on folio number 275 under Avalon Lodge in St. John's, Newfoundland (1).  Duncan Barnes "Date of
Initiation" was September 27, 1905.  He is 42 and living at Pilley's Island (where most of his children are born).  I know all of this information is accurate but I have his occupation as a "Master Mariner" in my family tree and this register lists his profession as "Trader". This gives me a little more detail about what he may have done on those ships.




The second mention of Duncan shows up on folio number 71 (2) but mentions that he " Resigned Dec 1919".  In 1920 Duncan left Newfoundland with his 3rd wife Theresa and purchased a house in

Panoramic WWI Photo



FINISHED!  PicMonkey worked great to piece together the nine scans I took of my great-grandfather Wentworth Barnes, WWI - "D" Company, 134th Overseas Battalion, C.E.F (Highlanders) photo.  With PicMonkey it only took about 30 minutes for me to figure it out and complete it.  I wasn't able to get it as large as I wanted, which limits the zoom, but it's enough to see the faces clearly.

I tried using an old version of PaintShop Pro that I already had, but I couldn't figure it out.  If you are familiar with these types of photo editing software you can use them as well.  I have always used P
icMonkey for images because I find it's easier, but that is my preference.

The hardest part was taking the photo out of the frame.  It was professionally framed so it was well secured.  I took the paper off the back of the frame, then I had to unscrew cables and lift at least 60 teeth.  This photo was glued to a piece of foam board and this made scanning it difficult so I needed a helper to keep it level.

I tried using my Flip-Pal first, but there were too many images for their software to stitch it properly without overlap shadows (I tried 3 times). I had to use my flatbed scanner instead for this job.  All in all, I spent a long time trying to get this right but I'll be a pro for the next multiple-image scan I need to piece together.

Using PicMonkey I created a long base canvas (I used 8000 x 1500 pixels).  I then added each scan (make sure you scan with some overlap for matching up) as a new overlay.  For each overlay that I was trying to line up, I changed the fade of the image to about 50%, this allows you to see the image underneath for matching up.  I used the buttons on their jackets to help line things up and used the arrow keys to make a more precise movement.  When I was happy with this I returned the fade to normal and moved on to the next image.  Once I added all nine of my images as overlays I clicked on each image (be careful not to move them) and used the Eraser tool (in Overlay pop up) and set the eraser size to about 50 and the Eraser Hardness to 0.  Zoom in a bit and then erase the visible line that is created by the overlap or anything near the line that looks a bit off.  When I was happy with the finished result, I flattened all the images together to make one large photo. Crop the new photo, make your edits to the colour and anything else you want to fix and save it or export it.  Just remember if you make a mistake you can undo it and try again.

I'm really happy that I didn't have to pay someone else to do it.  The photo is now edited, brassy spots removed and I can add it to my great-grandfather's digital file.

CLICK HERE to view the full-size image which allows you to zoom in.

Want to learn more about my great-grandfather, Wentworth Barnes?  Check out this post about his WWI Service File or the Barnes Family page.